Staff - SoC RTL Design Engineer

Role Overview

We are looking for a highly skilled RTL Designer to develop high-performance, scalable, and power-efficient digital designs for next-generation SoCs and Chiplets targeting AI, HPC, and Networking applications. This role requires deep expertise in RTL design, micro-architecture, and integration of high-speed interfaces, along with a strong focus on quality, performance, and first-time silicon success.

What You’ll Do

• Specify and own the reset sequencing architecture. Own the secure boot and fuse micro architecture and design.

• Coordinate with the subsystem leads on reference clock distribution, clock-domain crossing points at subsystem interfaces.

• Collaborate with the firmware team to define the hardware/software interface: interrupt controller, timer, UART/JTAG debug port, and any DMA or mailbox channels

• Own the clock-gating implementation strategy: coarse-grain vs. fine-grain gating, ICG cell selection, and sign-off methodology for dynamic power reduction.

• Define the chip-level power-domain plan: which blocks share supplies, where level-shifters and isolation cells are required, and how power states map to the PCIe and UCIe link power management protocols.

• Own the on-chip power management logic: power-state machine, supply sequencing, voltage regulator integration, and the firmware interface for runtime power control.

• Drive power intent (UPF/CPF) authoring and sign-off, coordinating with physical design team on power-domain floorplan, always-on routing, and isolation verification.

• Own the embedded management processor subsystem: processor integration, on-chip SRAM and ROM sizing, boot sequence, fuse and OTP interface, and the firmware execution environment.

• Define the management register map: the address space through which firmware configures operating modes, reads telemetry, controls power states, and manages DFT operations.

• Specify thermal monitoring integration: on-die temperature sensor placement, readout path to the management processor, and thermal throttling hooks.

What We’re Looking For

• 8+ years of digital IC design, with at least 3 years owning chip infrastructure — clocking, power management, reset or DFT — at block-lead or subsystem-owner level.

• Familiarity with embedded microcontroller integration: memory maps, boot ROM, interrupt controllers, and firmware bring-up at the hardware level.

• Experience with reset-domain architecture and reset synchronizer design in multi-power-domain chips.

• Strong SystemVerilog skills for infrastructure RTL: clock-gating cells, power FSMs, scan-enable muxing, and BIST controllers.
• BS/MS in Electrical Engineering, Computer Engineering, or equivalent.

Good to Have

• Background integrating a RISC-V or ARM Cortex-M class processor as a management/configuration engine in a non-CPU chiplet.

• Exposure to hardware security: secure boot, anti-tamper fuse programming, or related infrastructure.