Mission Systems Integration Engineer
odys-aviation · Long Beach CA ·
- Work mode
- Onsite
- Category
- Software engineering
- Experience
- 2+ years
At Odys, we’re mobilizing power, with Hybrid Power Systems developed for aerospace and in-demand everywhere. It’s the kind of mission diversity that demands a fresh way of thinking.
We began with an early bet on hybrid, when the mobility industry was focused on batteries. We designed, tested, and validated our first 1 MW high-speed generator in 12 months. And then we pushed further, developing systems with greater power density in less time. Today, our Hybrid Power Systems offer outputs ranging from 20 kW to 4 MW, with applications in the air or on the ground.
One of those applications is Laila, an unmanned drone designed for critical logistics and defense missions. With its 100 kW-class onboard Hybrid Power System, Laila can support medical cold-chain transport or serve as an aerial platform for counter-UAS measures.
The market interest has been overwhelming: Over 30 inbound requests from leading US and global manufacturers, and 14+ DoD contracts.
Our team comes from deep tech and aerospace, with backgrounds spanning drone and aircraft development, high-volume production, and electrified mobility.
We operate with urgency and ownership at every level. We validated high-speed generator technology faster than our peers, not because we skipped steps, but because we've been doing this long enough to know which ones matter most.
Creating the future of power, in the air and on the ground, is a challenge we’ve been training our entire lives for. If that sounds like you, this is the opportunity you’ve been waiting for.
About The Role
Are you passionate about integrating, testing, and validating the systems that make advanced unmanned aircraft fly autonomously and reliably? Do you thrive at the intersection of complex system integration, verification & validation, and real-time test campaigns? Join our engineering team as a Mission Systems Integration & Test Engineer.
Laila isn't a single fixed configuration - it's a platform that carries many different mission-specific payloads (EO/IR sensors, cargo and delivery systems, medical transport, communications relays, ISR and defense packages, and more).
A central part of this role is integrating those diverse payloads onto the aircraft so each mission configuration flies safely and performs as intended. You'll integrate and validate our on-board and ground system architectures - ensuring robust command & control, payload integration and management, and autonomous operations on Laila, our dual-use UAS platform, perform reliably as one cohesive system. You'll work closely with avionics, systems, payload, and GCS teams to deliver safe, reliable, certifiable, high-performance systems, and you'll be hands-on across payload-to-aircraft integration, system integration, SIL/HIL testing, field validation, and flight test campaigns - central to how payloads, navigation, and mission logic connect and perform together. You'll supplement this integration and test work with targeted software development where needed to close gaps and enable validation
Responsibilities
Payload-to-Aircraft Integration
Integrate diverse mission-specific payloads - EO/IR and vision sensors, cargo/delivery mechanisms, medical transport modules, communications relays, ISR and defense packages onto the aircraft as safe, reliable, mission-ready configurations.
Define and validate the mechanical, electrical, power, data, and software interfaces between payloads and the airframe, and capture them in payload ICDs.
Establish reusable, modular payload integration patterns so new payloads can be brought onto the platform quickly and repeatably.
Verify payload command, control, and data flow through the autopilot, onboard compute, and GCS across each mission configuration.
Characterize the impact of payloads on aircraft-level behavior (power budgets, EMI/EMC, weight & balance, thermal, latency) and drive resolution of integration issues.
System, Avionics & GCS Integration
Integrate avionics, sensors, and payloads into a cohesive onboard system - including autopilot, navigation, vision, electrical, mechanical, and power management components.
Own the integration between airborne systems and the Ground Control Station (GCS), enabling robust telemetry, video, payload control, and C2 links.
Integrate real-time communication and streaming protocols across subsystems (e.g., MAVLink, Ethernet, CAN, RTSP, UDP, or proprietary links).
Bring up and integrate flight control, mission logic, communication links, and payload interfaces into a validated end-to-end system.
Test, Verification & Validation
Lead software-hardware integration, debugging, and validation using SIL/HIL test setups and during ground or flight test campaigns.
Plan, execute, and document payload and system integration and test campaigns, verifying each mission configuration end-to-end and driving issues to closure.
Develop automated test environments and contribute to CI/CD workflows for verification and regression testing.
Analyze flight logs and system data to characterize system performance and identify integration and optimization opportunities.
Systems Engineering & Safety
Support requirements definition, ICD documentation, and traceability for integration, verification, and validation tasks in collaboration with system engineering.
Collaborate with avionics and systems teams to verify compliance with redundancy, fault tolerance, and safety design principles.
Participate in software and system reviews, interface discussions, integration planning, and verification & validation activities across hardware and software domains.
Supporting Software Development
Develop and maintain embedded and application-level scripts, test harnesses, and tooling that enable integration and validation of UAS subsystems.
Contribute to onboard autonomy, sensing, detection, and vision-based navigation features as needed to support integration and test objectives.
Required Qualifications
Degree in Computer Science, Electrical/Electronic, Aerospace, or Systems Engineering (or equivalent).
2+ years of experience in system integration, test, or verification & validation for UASs, eVTOLs, or other embedded aerospace/robotics systems.
Hands-on experience integrating payloads and avionics subsystems onto a vehicle or platform sensors, controllers, actuators, communications, and data links - including their mechanical, electrical, power, and data interfaces.
Experience with SIL/HIL test setups, ground/flight test campaigns, and real-time debugging of integrated hardware/software systems.
Strong understanding of hardware/software interaction and real-time debugging on SoMs such as NVIDIA Jetson or NXP iMX.
Working proficiency in C/C++ and Python sufficient to build test tooling, harnesses, and support integration efforts.
Strong experience with Linux (embedded and desktop) and middleware for robotic or avionics applications.
Excellent teamwork and communication skills across mechanical, electrical, and software domains.
Preferred Qualifications
Experience integrating multiple interchangeable or modular payloads onto a shared platform (e.g., EO/IR gimbals, cargo/delivery systems, comms relays, ISR packages).
Experience with payload interface standards and considerations such as weight & balance, power budgeting, EMI/EMC, and thermal management.
Experience with simulation and HIL testing for UASs, avionics, or robotic systems.
Experience with software test & code analysis tools such as VectorCast, LDRA, Coverity, and Understand.
Experience with data communication protocols such as RS-232/422/485, CAN, ARINC 429, and MIL-STD-1553.
Experience with MAVLink, STANAG-4586, or similar command and telemetry protocols.
Experience with network protocols, network configuration, and analysis tools (e.g., Wireshark).
Experience with video/data streaming technologies (e.g., GStreamer, FFmpeg, OpenCV).
Background in flight-critical or safety-critical software development and verification (DO-178C or equivalent).
Knowledge of system safety, fault tolerance, and reliability methods such as FDIR or fail-safe redundant architectures. Experience with model-based development tools (Simulink, System Composer, Cameo, Capella, SCADE, UML, SysML, etc.).
Experience with RTOS, ROS/ROS2, or equivalent robotics frameworks.
Experience integrating GNSS, vision, or RF-based navigation systems.
Experience with SORA/SAIL frameworks and the EASA UAS regulatory environment.
Experience with DevOps, CI/CD pipelines, containerization (Docker), and Git-based workflows.
Exposure to modular avionics or networked flight control computer (FCC) architectures.
Experience with cybersecurity concepts, techniques, mitigations, and testing.
Experience in UAS autonomy, perception, and future GNSS-denied operations